| Veneer Panels can be used to create a beautiful stone veneer or wainscot on interior or exterior walls. Check with your city or county building department and follow the building code for installation of veneer panels.
1. Working from the bottom of the wall upward, coat the wall with a 1/2-inch plus layer of mortar, covering slightly more than the width of each veneer panel.
2. Apply layer of mortar to the back of the veneer panel and press the panel firmly in place. To ensure maximum adhesion of the each panel to the wall surface, use a rubber mallet to tap each veneer panel into its final position making sure that it is level.
3. Repeat step #2, adding panels in a linear direction (end-to-end, rather than stacking) to create multiple courses (layers) of panels the until the desired height of wainscoting is reached.
|
